pixel
pixelpixelpixel
pixelHome pagepixelpixelAbout uspixelpixelFAQpixelpixelContact uspixelpixelFollow workhealthsafe on Twitterpixelpixelpixelpixelpixel
pixel pixelpixel
pixel
pixel

Safe work method statement - Electrical - Test and commission electrical system

1 of 17

Testing and commissioning of electrical equipment

The testing and commissioning of electrical equipment shall verify continuity, insulation integrity, polarity, turns ratio, calibration, adjustments, protective devices and relay settings, motor rotation, run-in operation and functional activation of all electrical equipment, devices and controls.

Tasks

Tasks associated with the testing and commissioning of electrical equipment would include:

  • Planning process associated with the testing and commissioning of electrical equipment;
  • Operation of testing equipment used in the testing and commissioning of electrical equipment;
  • Testing and commissioning of switchgear, electrical cables, control equipment, earthing system, lighting and power circuits;
  • Functional testing of an electrical system;
  • Working at heights when testing and commissioning electrical equipment;
  • Manual handling and ergonomic issues associated with the testing and commissioning of electrical equipment;
  • Personal protective equipment required to be worn and/or used when testing and commissioning electrical equipment;
  • Housekeeping of a workplace and work area;
  • Monitoring of control measures in the performance of the work task.

pixelpixel
Safety procedure includes

Testing and commissioning of electrical equipment safe work method statement

Testing and commissioning of electrical equipment safe work method statement is a 16 page document compliant with statute OHS reporting requirements. It identifies known hazards and risks, and outlines the control measures to be implemented to eliminate or minimise the risk of death, injury or illness as a result of undertaking the testing and commissioning of electrical equipment.
more


$125.00
inc GST

Control measures

Control measures to eliminate or minimise the risk of death, injury or illness to persons are addressed in the safe work method statement as per the following sections.

  • Consultation with employees.
  • Generation of hazards.
  • Testing and commissioning of electrical equipment without having been involved in the planning process.
  • Incorrect testing equipment used in the testing and commissioning process.
  • Testing and commissioning of switchgear.
  • Testing and commissioning of electrical cables.
  • Testing and commissioning of earthing system.
  • Testing and commissioning of lighting and power circuits.
  • Functional testing of an electrical system.
  • Work at heights whilst testing and commissioning electrical equipment.
  • Manual handling issues.
  • Personal protective equipment requirements.
  • Training requirements.
  • Housekeeping requirements.
  • Failure to monitor controls.
  • Risk matrix and descriptors.
  • Additional hazards, risks and controls.
  • Approval and change management form.
  • Sign-off for testing and commissioning of electrical equipment.

Return to electrical works

Return to safe work method statements

pixel
pixel

Mini Cart

Click the checkout button to continue
pixel


pixel
pixel
  Login  |  Site Credits