pixel
pixelpixelpixel
pixelHome pagepixelpixelAbout uspixelpixelFAQpixelpixelContact uspixelpixelFollow workhealthsafe on Twitterpixelpixelpixelpixelpixel
pixel pixelpixel
pixel
pixel

 Masonry blockwork - Lintel construction safe work method statement/job safety analysis  

Construction of lintel

The construction of a lintel using masonry blocks is commonly incorporated in the construction of a masonry block wall. A blocklayer normally undertakes this type of construction work.

Lintels are commonly used in the construction of a masonry block wall to:

  • Create a window or door opening in a wall.
  • Create a support beam between two columns.

Tasks

Tasks associated with the construction of a masonry block lintel include:

  • Assessment of work environment for hazards and risks;
  • Protection of exposed steel reinforcement;
  • Establishment of working platforms e.g. scaffolding;
  • Setup of mortar boards relevant to working platform and work area;
  • Handling, placement and laying of masonry blocks in the construction of a masonry block lintel;
  • Temporary propping and support of a masonry block lintel;
  • Removal of temporary propping and support of a masonry block lintel;
  • Working at a height when constructing a lintel;
  • Selection of personal protective equipment (PPE);
  • How to conduct a hazard identification of the task being performed;
  • Compliance with specific controls as per a regulation, code of practice;
  • How to assess the risk to workers undertaking the construction of a masonry block lintel.

Online SWMS/JSA safe work method statement subscription service

WHS compliance has never been easier with your safe work method statement or job safety analysis prepared by ex WHS Qld Government Workplace Health and Safety Inspectorate in consultation with Industry OHS Representatives to comply with Work Health and Safety Legislation, Codes of Practice, Industry Standards and Australian Standards.

As a subscriber to a WHS online safe work method statement SWMS or job safety analysis JSA you and your employees can:

  • Access and view the work method statement, swms or jsa real time from any web capable device e.g. mobile phone, tablet, laptop, etc (for best results we recommend using the web browser Safari); and
  • Print the safe work method statement, swms or jsa sign off sheet and approval form including change management approval in a pdf format or hard-copy via the print option; and
  • Email the safe work method statement, swms or jsa notification advising a principal contractor, PCBU's and workers as to any specific controls to be implemented at a workplace for which the swms or jsa relates to; and
  • Never worry again about amendments, updates and versions; and
  • WHS maintain one controlled version of the safe work method statement or job safety analysis online as part of our continual improvement process; and
  • That means there can be no confusion as you and your employees are all using the same safe work method statement, swms or jsa at the same time, leaving you to concentrate on your business.

How do you access and implement the safe work method statement or job safety analysis?

To get you online, working, implementing and demonstrating safety compliance management, it's as easy as:

  • Log in via a mobile phone using your username and password;
  • Complete and email the safe work method statement, swms or jsa notification with user access to a principal contractor, PCBU's and workers for a specific workplace; and
  • That's it unless you need to print the sign off sheet, hazard and risk controls or change management approval form.

pixel

 1 Year access - Online and print  

1-5 Users

1 Year online and print access to Lintel construction SWMS/JSA - 5 persons @ $25.00 per user.

more

Total: $125.00 inc GST

6-10 Users

1 Year online and print access to Lintel construction SWMS/JSA - 10 persons @ $15.00 per user.

more

Total: $150.00 inc GST

pixel
 Save up to 20% More  
pixel

Mini Cart

Click the checkout button to continue
pixel

 Example Safe work method statement / job safety analysis for construction of masonry lintels  

The sample safe work method statement is an extract of the first two identified health and safety hazards for masonry lintel construction.

  • The business logo and administrative details you provide at time of purchase shall replace those that you see in the sample safe work method statement/job safety analysis.

pixel pixel

 Masonry blockwork - Lintel construction safe work method statement  

 Hazard  
 Risk/outcome  
 Control measures  
 Implementation of controls  
Consultation not undertaken with workers as to the safe method of constructing a masonry block lintel.Workers shall be exposed to risk of death, serious injury or illness where the construction of a masonry block lintel is performed or undertaken incorrectly.

Sustainable injuries/illnesses would include but not be limited to:

  • First aid medical treatment for cuts and abrasions;
  • Fall from heights resulting in multiple fractures;
  • Skin penetrating injuries;
  • Crushing injuries;
  • Dermatitis;
  • Musculoskeletal injuries; and
  • Permanent disability.

Electrical Plumbing Group shall consult workers as to the method by which the construction of a masonry block lintel shall be undertaken.Electrical Plumbing Group has a duty to ensure the health and safety of themselves, workers and other persons.
  • Workers undertaking the construction of a masonry block lintel, shall be provided information, instruction, training and supervision as to the correct method by which to construct a masonry block lintel.

Consultation

Consultation shall occur between line management, workers and health and safety representatives as to the method by which to construct a masonry block lintel.

The process of consultation shall assess hazards generated as a result of constructing a masonry block lintel, and take into consideration:

  • A review of all plans, drawing, specifications, etc to identify potential hazards associated with the scope of works;
  • Environmental hazards and risks to workers e.g. steel starter bars;
  • Nature of work to be undertaken with respect to the construction of a masonry block lintel;
  • Conduct a risk assessment to identify all potential hazards and risks associated with the construction of a masonry block lintel;
  • Structural adequacy of masonry blockwork, intended to support the masonry block lintel;
  • Working at heights, prevention of tools and materials falling;
  • Heavy duty scaffold incorporating working platforms, edge protection and containment screening.
  • Handling and loading of masonry blocks to a working platform;
  • Hazardous chemicals, substances and products used in the construction of a masonry block lintel;
  • Hazardous manual tasks associated with the construction of a masonry block lintel;
  • Are persons at risk of serious injury when constructing a masonry block lintel?

Electrical Plumbing Group shall make a prepared for the construction of a masonry block lintel available for perusal by workers.

Residual risk

Following the implementation of controls the risk should reduce to:

 Hazard  
 Risk/outcome  
 Control measures  
 Implementation of controls  
Introduction of hazards generated from the construction of a masonry block lintel as a result of implementing proposed control measures. Workers shall be exposed to risk of death, serious injury or illness where hazards are created as a result of implementing proposed control measures.

Sustainable injuries/illnesses would include but not be limited to:

  • First aid medical treatment for cuts and abrasions;
  • Fall from heights resulting in multiple fractures;
  • Skin penetrating injuries;
  • Crushing injuries;
  • Dermatitis;
  • Musculoskeletal injuries; and
  • Permanent disability.
Control measures as per the hierarchy of controls shall be developed and implemented where additional hazards are generated from the construction of a masonry block lintel.
Electrical Plumbing Group shall ensure hazards generated as a result of constructing a masonry block lintel are identified with the hazard controlled.

Control measures

To prevent risk of death, serious injury or illness to workers and other persons, the person with management or control of the works shall ensure:

  • The risk of death, serious injury or illness resulting due to the conduct of the task is assessed to determine a persons exposure;
  • Control measures to eliminate or minimise the risk of death, serious injury or illness to persons shall be developed in consultation with workers;
  • Control measures as per the hierarchy of controls shall be implemented to prevent, or minimise a persons level of exposure to risk of death, serious injury or illness;
  • Workers undertaking the construction of a masonry block lintel shall be trained as to any new control/s to be implemented and informed as to the hazard notification process should additional hazards be identified.

Residual risk

Following the implementation of controls the risk should reduce to:

 Additional hazards and risks with construction of masonry lintels  

Additional hazards and risks identified with construction of masonry lintels for which control measures have been developed as per the risk identification process include:

  • Planning and preparation for construction of masonry lintel.
  • Environmental hazards at the workplace and immediate work area.
  • Plant used in the construction of a masonry lintel.
  • Contact with portland cement.
  • Temporary propping and support of a masonry block lintel.
  • Laying masonry lintel.
  • Removal of temporary propping and supports.
  • Working at heights in the construction of masonry lintels.
  • Hazardous chemicals and products associated with the construction of masonry lintels.
  • Hazardous manual tasks associated with constructing masonry lintels.
  • Workers not provided with the required personal protective equipment and having not received instruction as to method by which to wear an article of PPE.
  • Training not provided to workers as to how to construct masonry lintels.
  • Housekeeping of a workplace not undertaken and/or no areas assigned for the storage of materials and plant.
  • Workers not advised of specific controls to be implemented to ensure compliance with Work Health and Safety Legislation, Codes of Practice and Standards.
  • Performance of tasks and activities undertaken in connection with the construction of masonry lintels.
  • Failure to monitor the implementation of control measures.

How do you keep employees and clients current and up to date?

Simple each user be they an employee, contractor or client is assigned a unique username and password to access the controlled version for the construction of masonry lintels jsa/swms online.

  • Each user can access and view the online swms/jsa from a web capable device e.g. mobile phone with their username and password.
  • Line management personnel can access and print the safe work method statement/job safety analysis and online jsa/swms forms.
  • Line management personnel can send an swms/jsa email notification to a principal contractor, pcbu's and workers advising as to the details of the workplace, principal contractor, commencement and completion dates, person with management or control and any specific controls to be implemented when constructing a masonry lintel.
  • Users are notified of an amendment to the job safety analysis/work method statement via the online ohs diary and email notification.

What we will do to get you online

As a WHS online safe work method statement or job safety analysis subscriber WHS shall:

  • Create a group user account for your business and assign the user access required by you and your employees.
  • Insert your company logo and business details throughout the online safe work method statement, swms or jsa for the purpose of work health and safety compliance.
  • Notify you if the work method statement or job safety analysis or it's safe operating procedures or methods are amended.

Ordering is simple

  1. Add the safe work method statement, job safety analysis or safe operating procedure and any additional swms's, jsa's or sop's you require to the shopping cart.

  2. Follow the checkout process, ensuring you attach your company logo in a high resolution JPEG format for inclusion in the online safe work method statement/job safety analysis.

  3. Complete your order and payment process. A Tax Invoice will be forwarded to the email address you provide.

What happens next?

Upon receipt of payment notification WHS shall:

  • Send you an email requesting any additional information we may require to create your group registration.
  • Within 2 hours, customise your online safe work method statement/job safety analysis to incorporate your company logo and relevant business details, and create the required subscriber user access and email details of usernames and passwords to you. Where our workload is excessive we reserve the right to extend this time frame to 24 hours.

100% Money back guarantee!!

If you find a more comprehensive online safe work method statement, job safety analysis, safe operating procedure, SWMS, JSA or SOP accessible online, able to be printed and offers an email notification service from any web capable device, and you provide evidence of such we will refund your purchase.

pixel
 Associated swms's/jsa's  

Shoppers who bought the lintel construction safe work method statement/job safety analysis also purchased.


Return to blocklaying

Return to SWMS's/JSA's

pixel
pixel


pixel
pixel
  Login  |  Site Credits