pixel
pixelpixelpixel
pixelHome pagepixelpixelAbout uspixelpixelFAQpixelpixelContact uspixelpixelFollow workhealthsafe on Twitterpixelpixelpixelpixelpixel
pixel pixelpixel
pixel
pixel

 Quick cut saw safe work method statement/job safety analysis  

Operation of quick cut saw

The purpose of using a quick cut saw is to cut masonry materials e.g. concrete, masonry block, etc.

  • A person as a concrete cutter, labourer, etc would generally operate a quick cut saw.

Tasks

Tasks associated with the operation of a concrete vibrator to consolidate fresh concrete would include:
  • Assessment of work environment for hazards and risks;
  • Protection of exposed steel reinforcement;
  • Identification of faulty, defective or non-compliant plant;
  • Pre-operational inspection of quick cut saw;
  • Identification of guards fitted to quick cut saw;
  • Re-fueling of quick cut saw;
  • Operation of quick cut saw for the cutting of masonry materials;
  • Handling of cementitious materials e.g. concrete;
  • Working at heights whilst cutting masonry materials;
  • Establishment of working platforms e.g. scaffolding;
  • Hazardous manual tasks when handling and operating a quick cut saw;
  • Selection of personal protective equipment (PPE);
  • How to conduct a hazard identification of the task being performed;
  • How to assess the risk to workers handling and operating a quick cut saw in the cutting of masonry materials.

Online SWMS/JSA safe work method statement subscription service

WHS compliance has never been easier with your safe work method statement or job safety analysis prepared by ex WHS Qld Government Workplace Health and Safety Inspectorate in consultation with Industry OHS Representatives to comply with Work Health and Safety Legislation, Codes of Practice, Industry Standards and Australian Standards.

As a subscriber to a WHS online safe work method statement SWMS or job safety analysis JSA you and your employees can:

  • Access and view the work method statement, swms or jsa real time from any web capable device e.g. mobile phone, tablet, laptop, etc (for best results we recommend using the web browser Safari); and
  • Print the safe work method statement, swms or jsa sign off sheet and approval form including change management approval in a pdf format or hard-copy via the print option; and
  • Email the safe work method statement, swms or jsa notification advising a principal contractor, PCBU's and workers as to any specific controls to be implemented at a workplace for which the swms or jsa relates to; and
  • Never worry again about amendments, updates and versions; and
  • WHS maintain one controlled version of the safe work method statement or job safety analysis online as part of our continual improvement process; and
  • That means there can be no confusion as you and your employees are all using the same safe work method statement, swms or jsa at the same time, leaving you to concentrate on your business.

How do you access and implement the safe work method statement or job safety analysis?

To get you online, working, implementing and demonstrating safety compliance management, it's as easy as:

  • Log in via a mobile phone using your username and password;
  • Complete and email the safe work method statement, swms or jsa notification with user access to a principal contractor, PCBU's and workers for a specific workplace; and
  • That's it unless you need to print the sign off sheet, hazard and risk controls or change management approval form.

pixel

 1 Year access - Online and print  

1-5 Users

1 Year online and print access to Quick cut saw SWMS/JSA - 5 persons @ $25.00 per user.

more

Total: $125.00 inc GST

6-10 Users

1 Year online and print access to Quick cut saw SWMS/JSA - 10 persons @ $15.00 per user.

more

Total: $150.00 inc GST

pixel
 Save up to 20% More  
pixel

Mini Cart

Click the checkout button to continue
pixel

 Example Safe work method statement / job safety analysis for using a quick cut saw  

The sample safe work method statement is an extract of the first two identified health and safety hazards for the operation and use of a quick cut saw.

  • The business logo and administrative details you provide at time of purchase shall replace those that you see in the sample safe work method statement/job safety analysis.

pixel pixel

 Using a quick cut saw safe work method statement  

 Hazard  
 Risk/outcome  
 Control measures  
 Implementation of controls  
Consultation not undertaken with workers as to the safe method of operating a quick cut saw for the cutting of masonry materials.Workers shall be exposed to risk of death, serious injury or illness where the cutting of masonry materials with a quick cut saw is performed or undertaken incorrectly.

Sustainable injuries/illnesses would include but not be limited to:

  • First aid medical treatment for cuts and abrasions;
  • Loss of limb;
  • Skin penetrating injuries;
  • Crushing injuries;
  • Musculoskeletal injuries;
  • Permanent disability; and
  • Respiratory disease.

The cutting of masonry materials with a quick cut saw shall be undertaken in accordance with any manufacturers instruction and any instructions provided by Electrical Plumbing Group .Electrical Plumbing Group has a duty to ensure the health and safety of themselves, workers and other persons.
  • Workers cutting masonry materials using a quick cut saw shall be provided information, instruction, training and supervision as to the correct method of operating a quick cut saw in the cutting of masonry materials.

Consultation

Consultation shall occur between line management, workers and health and safety representatives as to the safe method by which to operate a quick cut saw for the cutting of masonry materials.

The process of consultation shall assess hazards generated from cutting masonry materials with a quick cut saw and take into consideration:

  • Could an alternative means of cutting masonry materials be used with less risk to the user;
  • Selection of the quick cut saw e.g. type, cutting blade size, etc shall be dependant upon task to be performed;
  • Pre-operational inspection and fueling of a quick cut saw;
  • Handling and operation of a quick cut saw in the cutting of masonry materials;
  • Contact with cementitious materials when cutting masonry materials and cleaning quick cut saw;
  • Working at heights, prevention of persons and quick cut saw falling;
  • Environmental hazards and risks to workers e.g. steel starter bars;
  • Are persons at risk of serious injury when using a quick cut saw to cut masonry materials?
  • Hazardous manual tasks associated with the handling and operation of a quick cut saw in the cutting of masonry materials.

Electrical Plumbing Group shall make a prepared for the operation of a quick cut saw to cut masonry materials available for perusal by workers.

Residual risk

Following the implementation of controls the risk should reduce to:

 Hazard  
 Risk/outcome  
 Control measures  
 Implementation of controls  
Introduction of hazards generated from the operation of a quick cut saw to cut masonry materials as a result of implementing proposed control measures. Workers shall be exposed to risk of death, serious injury or illness where hazards are created as a result of implementing proposed control measures.

Sustainable injuries/illnesses would include but not be limited to:

  • First aid medical treatment for cuts and abrasions;
  • Loss of limb;
  • Lacerations;
  • Skin penetrating injuries;
  • Crushing injuries;
  • Musculoskeletal injuries;
  • Permanent disability; and
  • Respiratory disease.
Control measures as per the hierarchy of controls shall be developed and implemented where additional hazards are generated as a result of cutting masonry materials with a quick cut saw.
Electrical Plumbing Group shall ensure hazards generated from the cutting of masonry materials with a quick cut saw are identified with the hazard controlled.

Control measures

To prevent risk of death, serious injury or illness to workers and other persons, the person with management or control of the works shall ensure:

  • The risk of death, serious injury or illness resulting due to the conduct of the task is assessed to determine a persons exposure;
  • Control measures to eliminate or minimise the risk of death, serious injury or illness to persons shall be developed in consultation with workers;
  • Control measures as per the hierarchy of controls shall be implemented to prevent, or minimise a persons level of exposure to risk of death, serious injury or illness;
  • Workers cutting masonry materials with a quick cut saw shall be trained as to any new control/s to be implemented and informed as to the hazard notification process should additional hazards be identified.

Residual risk

Following the implementation of controls the risk should reduce to:

 Additional hazards and risks with operating and using a quick cut saw  

Additional hazards and risks identified with the operation and use of a quick cut saw for which control measures have been developed as per the risk identification process include:

  • Workers operating a quick cut saw to cut masonry materials without having been involved in the planning process.
  • Exposed steel reinforcement bars.
  • Working with faulty, defective or non-compliant plant.
  • Alteration or modification of quick cut saw.
  • Guards not fitted or installed to quick cut saw.
  • Incompatible cutting blade or disc fitted to a quick cut saw.
  • Operation of quick cut saw without conducting a pre-operational inspection.
  • Operation of a quick cut saw for the cutting of masonry materials.
  • Refueling of quick cut saw.
  • Exposure to cementitious materials whilst cutting masonry materials using a quick cut saw.
  • Working at a height when operating a quick cut saw.
  • Hazardous chemicals and products associated with the operation and maintenance of a quick cut saw.
  • Handling and operation of a quick cut saw.
  • Workers not provided with the required personal protective equipment and having not received instruction as to method by which to wear an article of PPE.
  • Training not provided to workers operating a quick cut saw in the performance of a task.
  • Housekeeping of a workplace not undertaken and/or no areas assigned for the storage of materials and plant.
  • Workers not advised of specific controls to be implemented to ensure compliance with Work Health and Safety Legislation, Codes of Practice and Standards.
  • Performance of tasks and activities undertaken in connection with the operation of a quick cut saw.
  • Failure to monitor the implementation of control measures.

How do you keep employees and clients current and up to date?

Simple each user be they an employee, contractor or client is assigned a unique username and password to access the controlled version for the operation and use of a quick cut saw jsa/swms online.

  • Each user can access and view the online swms/jsa from a web capable device e.g. mobile phone with their username and password.
  • Line management personnel can access and print the safe work method statement/job safety analysis and online jsa/swms forms.
  • Line management personnel can send an swms/jsa email notification to a principal contractor, pcbu's and workers advising as to the details of the workplace, principal contractor, commencement and completion dates, person with management or control and any specific controls to be implemented when using a quick cut saw.
  • Users are notified of an amendment to the job safety analysis/work method statement via the online ohs diary and email notification.

What we will do to get you online

As a WHS online safe work method statement or job safety analysis subscriber WHS shall:

  • Create a group user account for your business and assign the user access required by you and your employees.
  • Insert your company logo and business details throughout the online safe work method statement, swms or jsa for the purpose of work health and safety compliance.
  • Notify you if the work method statement or job safety analysis or it's safe operating procedures or methods are amended.

Ordering is simple

  1. Add the safe work method statement, job safety analysis or safe operating procedure and any additional swms's, jsa's or sop's you require to the shopping cart.

  2. Follow the checkout process, ensuring you attach your company logo in a high resolution JPEG format for inclusion in the online safe work method statement/job safety analysis.

  3. Complete your order and payment process. A Tax Invoice will be forwarded to the email address you provide.

What happens next?

Upon receipt of payment notification WHS shall:

  • Send you an email requesting any additional information we may require to create your group registration.
  • Within 2 hours, customise your online safe work method statement/job safety analysis to incorporate your company logo and relevant business details, and create the required subscriber user access and email details of usernames and passwords to you. Where our workload is excessive we reserve the right to extend this time frame to 24 hours.

100% Money back guarantee!!

If you find a more comprehensive online safe work method statement, job safety analysis, safe operating procedure, SWMS, JSA or SOP accessible online, able to be printed and offers an email notification service from any web capable device, and you provide evidence of such we will refund your purchase.

pixel
 Associated swms's/jsa's  

Shoppers who bought the quick cut saw safe work method statement/job safety analysis also purchased.


Return to petrol operated tools

Return to tools

Return to SWMS's/JSA's

pixel
pixel


pixel
pixel
  Login  |  Site Credits